CruzPro DSP Active Depth, Temperature Transducers with NMEA 0183 output

Specifications:

Operating Voltage:

9.5 - 16.0 VDC

Current Drain:

0.035 amps nominal

Output power:

320 watts RMS

Equivalent processed power:

DSP power of 6400 watts

Depth:

1000 foot (300M) and 450 foot (140M) versions available

Water Temperature:

32 deg F (0 deg C) to 90 deg F (32 deg C)

Data Ouput:

NMEA 0183 serial 4800 BAUD, $SDDPT, $SDDBT, $SDMTW

Data:

$SDDPT,xxx.x,*CS (Depth in Meters)

$SDDBT,xxx.x,f,xxx.x,M,xxx.x,F*CS (Depth in Fathoms, Meters & Feet)

$SDMTW,xxx.x,C*CS (Water Temperature)

Mounting:

Retractable bronze thru-hull

Fixed bronze thru-hull

Fixed plastic thru-hull

Plastic transom mount

 

1) ATT120A transom mount 450 ft  

2) ATT120B transom mount 1000 ft

3) ATT120AT transom mount 450 ft with temperature 

4) ATT120BT transom mount 1000 ft with temperature

5) ATU120A thru-hull 450 ft

6) ATU120B thru-hull 1000 ft

7) ATU120AT thru-hull 450 ft with temperature

8) ATU120BT thru-hull 1000 ft with temperature

9) ATB120A bronze thru-hull 450 ft

10) ATB120B bronze thru-hull 1000 ft

11) ATB120AT bronze thru-hull 450 ft with temperature

12) ATB120BT bronze thru-hull 1000 ft with temperature

13) ATBR120A retractable bronze thru-hull 450 ft

14) ATBR120B retractable bronze thru-hull 1000 ft

15) ATBR120AT retractable bronze thru-hull 450 ft with temperature

16) ATBR120BT retractable bronze thru-hull 1000 ft with temperature

Active Depth/Temperature Transducers

The DSP technology used by the CruzPro active transducers provide for reliable depth tracking to over 1000 feet (300M). The DSP technology also provides superior high speed operation by reducing the high speed ringing effects of transducer buffeting and slap.

These active transducers operate at 120khz to prevent interference with other nearby depth sounders and fishfinders and are immune to the effects of other depth sounders and fishfinders.

Just connect 12V to the 30 foot (9.7M) cable and connect the NMEA 0183 data wire to any NMEA compatible instrument, computer or NMEA data repeater. The ASCII NMEA 0183 information can be used to log depth and water temperature, repeat the display information at a remote location or for use with the CruzPro SEAviz virtual instrumentation software running under Windows on your computer.