|
|
|
CruzPro FU30 - Digital Fuel Gauge - Consumption Calculator & Alarm
The FU30 Digital Fuel Gauge displays fuel remaining in gallons, liters or percent (0-100%) in tenths, fuel used (gallons or liters), and fuel consumption rate (gallons/hr or liters/hr). It works with all popular fuel senders manufactured by Centroid, Aerotech, VDO, Teleflex, Faria, GM, Stewart-Warner and others (sender not provided). Low and High fuel alarms can be set over the entire range of the instrument/sender. When activated, the FU30 built-in 85 dB alarm will sound and the display will flash. The alarm can be enabled or disabled with a single key press. Five levels of backlighting can be selected and all set-up, calibrations constants, alarm values, and sender calibration is saved to non-volatile memory. Data is output on an NMEA 0183 compatible serial data output. The data output terminal can be programmed as an external alarm output. The FU30 "learns' the shape of your tank and eliminates sender errors and non-linearities, providing an accuracy not available previously. With a press of the button you can display fuel remaining (in gallons, liters or %), fuel used, fuel consumption rate and low fuel alarm set-point. The FU30 draws only 0.017 amps and 5 levels of backlight (including OFF) can be selected from the front panel and is saved to non-volatile memory. The FU30 outputs fuel remaining on the standard NMEA 0183 serial data line at 4800 BAUD. This ASCII information can be used to log engine performance or repeat the display information elsewhere.
|
