battery monitor
digital voltmeter
 Digital Gauge
  
Digital battery monitor

 

 

 

 

CruzPro AC and DC Monitoring

 

  • ER-1 External Relay Switch
    The ER1 external relay switch allows you to switch high current loads of up to 10 amps with the "external alarm" output signal from your CruzPro gauges. 
  • V25 / V55 Digital Volts Gauge. 9.5 - 33.0 VDC. Settable high and low voltage alarm. Built-in 85 dB alarm buzzer, 5 levels of backlighting, NMEA 0183 output, 3 large digits. 
  • V30 / V60 Three Bank Digital Volts Gauge. Any combination of 9.5 - 33.0 VDC. Independent settable high and low voltage alarms for each bank. Built-in 85 dB alarm buzzer, 5 levels of backlighting, NMEA 0183 output. 
  • A30 / A60 Digital Amps Gauge. Programmable to use 5.0 - 900 amp shunt (available separately). 0.1 amp resolution to +/- 90.0 amps, 5 levels of backlighting, NMEA 0183 output, works from 9.5 to 33.0 VDC power supply, 0.017 amps nominal draw.
  • *** NEW *** VAH110 Volts/Amp/Amp-Hour Monitor/w Alarms & NMEA
    An accurate fuel gauge for your battery. At a touch of the button you know exactly what percentage of your battery charge remains or when to stop charging. Set accurate high and low voltage alarms for each battery bank individually, low charge alarm, 5 levels of backlighting, NMEA 0183 output, charger control, etc. NMEA 0183 or external alarm output. 
  • VAH30 / VAH60 Battery Volts/Amps/Amp-Hour Monitor. An accurate fuel gauge for your battery. At a touch of the button you know exactly what percentage of your battery charge remains or when to stop charging. Set accurate high and low voltage alarms, low charge alarms, 5 levels of backlighting, NMEA 0183 output, etc. Three models: 3 bank 450 amp version and single bank 150 amp version. All supplied with appropriate shunts. 
  • VAH35 / VAH65 Three Bank Volts/Amp/Amp-Hour Monitor/w Alarms & NMEA
    An accurate fuel gauge for your battery. At a touch of the button you know exactly what percentage of your battery charge remains or when to stop charging. Set high and low volts alarm, low charge alarm, 5 levels of backlighting, NMEA 0183 output, etc. NMEA 0183 or external alarm output. 
  • *** NEW *** VAF110 4.3" x 4.3" AC Volts/Amps/Frequency/kW Monitor. Accurate digital display of AC Volts, Amps, Frequency and KW. At a touch of the button you know exactly what your shore power or generator is doing. Set accurate high and low voltage and high and low frequency alarms, 5 levels of backlighting, automatic generator cut-off. Covers 90-300 VAC, 0-150 Amps, 40-70 Hz. Supplied with both voltage and current transformers. Large LCD display. NMEA 0183 data output 
  • VAF30 / VAF60 AC Volts/Amps/Frequency/kW Monitor. Accurate digital display of AC Volts, Amps, Frequency and KW. At a touch of the button you know exactly what your shore power or generator is doing. Set accurate high and low voltage and high and low frequency alarms, 5 levels of backlighting, automatic generator cut-off. Covers 90-300 VAC, 0-150 Amps, 40-70 Hz. Supplied with both voltage and current transformers. 
  • SAR20 Smart Alternator Regulator. A multi-step battery charge controller provide bulk, absorption, float and equalization charge cycles. Handles both 12 and 24 Volts and comes complete with battery temperature sensor. Program battery bank size, alternator size, battery chemistry and whether alternator is "hot rated". 
  • DI30 / DI60 12/24V Light Dimmer. 8 amp and 16 amp electronic light dimmer and DC motor speed controller with instant ON/OFF and dimmer memory. Has external input for remote control and optional light sensor inputs (used to turn dimmer ON/OFF when sun sets/rises). 
  • CC10 Six amp charge regulator. Low cost fixed voltage regulator. Sense battery voltage and regulate your battery charge from solar panels. This regulator enable you to leave your charging source connected permanently without fear of damaging overcharges assuring you a fully charged battery whenever you need it. 
  • CC20 Eight amp charge regulator. User settable solar charge regulator. Sense battery voltage and regulate your battery charge from solar panels. Bulk charge, float charge and over voltage indicator LEDs display operation of unit at all times. 
  • CC30 Twenty amp charge regulator. User settable solar charge regulator. Sense battery voltage and regulate your battery charge from solar panels. Bulk charge, float charge and over voltage indicator LEDs display operation of unit at all times.
  • CC35 Eight amp PWM charge regulator with LVD. This intelligent three step charge regulator automatically delivers bulk, absorption and float charges. The Low Voltage Disconnect (LVD) sheds the load if the battery voltage falls below the minimum allowable voltage to prevent damaging low battery charge that can sulfate your battery.

 

Cruzpro digital
AC monitor
 cruzpro